dmesg - atom a330 linux mint 17.2 64bit + ssd

Return To atom a330 linux mint 17.2 64bit + ssd System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-38-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015 (Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffaffff] ACPI data
BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffeffff] ACPI NVS
BIOS-e820: [mem 0x00000000cfff0000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A330ION , BIOS P1.40 07/23/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0E0000000 mask 0E0000000 uncachable
  1 base 000000000 mask 000000000 write-back
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3584MB, range: 512MB, type UC
reg 1, base: 0GB, range: 4GB, type WB
total RAM covered: 3584M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 1G 	num_reg: 2  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbd000, 0x01fbdfff] PGTABLE
BRK [0x01fbe000, 0x01fbefff] PGTABLE
BRK [0x01fbf000, 0x01fbffff] PGTABLE
init_memory_mapping: [mem 0xcfc00000-0xcfdfffff]
 [mem 0xcfc00000-0xcfdfffff] page 2M
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
init_memory_mapping: [mem 0xcc000000-0xcfbfffff]
 [mem 0xcc000000-0xcfbfffff] page 2M
init_memory_mapping: [mem 0x80000000-0xcbffffff]
 [mem 0x80000000-0xcbffffff] page 2M
BRK [0x01fc1000, 0x01fc1fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x7fffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x7fffffff] page 2M
init_memory_mapping: [mem 0xcfe00000-0xcff9ffff]
 [mem 0xcfe00000-0xcff9ffff] page 4k
BRK [0x01fc2000, 0x01fc2fff] PGTABLE
RAMDISK: [mem 0x347d8000-0x363e3fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FA6B0 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000CFFA0000 00003C (v01 072310 RSDT1353 20100723 MSFT 00000097)
ACPI: FACP 0x00000000CFFA0200 000084 (v01 A_M_I  OEMFACP  12000601 MSFT 00000097)
ACPI: DSDT 0x00000000CFFA0450 006D6C (v01 AS259  AS259132 00000132 INTL 20051117)
ACPI: FACS 0x00000000CFFB0000 000040
ACPI: APIC 0x00000000CFFA0390 000080 (v01 072310 APIC1353 20100723 MSFT 00000097)
ACPI: MCFG 0x00000000CFFA0410 00003C (v01 072310 OEMMCFG  20100723 MSFT 00000097)
ACPI: OEMB 0x00000000CFFB0040 000078 (v01 072310 OEMB1353 20100723 MSFT 00000097)
ACPI: AAFT 0x00000000CFFAA450 000027 (v01 072310 OEMAAFT  20100723 MSFT 00000097)
ACPI: NVHD 0x00000000CFFB00C0 000284 (v01 072310 NVHDCP   20100723 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000cff9ffff]
Initmem setup node 0 [mem 0x00000000-0xcff9ffff]
  NODE_DATA [mem 0xcff9b000-0xcff9ffff]
 [ffffea0000000000-ffffea00033fffff] PMD -> [ffff8800cc000000-ffff8800cf3fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0xcff9ffff]
On node 0 totalpages: 851774
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 13247 pages used for memmap
  DMA32 zone: 847776 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff8800cfa00000 s81408 r8192 d20992 u524288
pcpu-alloc: s81408 r8192 d20992 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 838442
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3308200K/3407096K available (7626K kernel code, 1131K rwdata, 3596K rodata, 1352K init, 1300K bss, 98896K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 13631488 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 1599.868 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.73 BogoMIPS (lpj=6399472)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ftrace: allocating 29244 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Atom(TM) CPU  330   @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
Disabled fast string operations
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2
Disabled fast string operations
 #3[    0.124094] Disabled fast string operations
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (12798.94 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcffb0000-0xcffeffff] (262144 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 17:32:55, date: 07/11/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfbffffff]
pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfebfffff]
pci 0000:00:00.0: [10de:0a82] type 00 class 0x060000
pci 0000:00:00.1: [10de:0a88] type 00 class 0x050000
pci 0000:00:03.0: [10de:0aad] type 00 class 0x060100
pci 0000:00:03.0: reg 0x10: [io  0x4f00-0x4fff]
pci 0000:00:03.1: [10de:0aa4] type 00 class 0x050000
pci 0000:00:03.2: [10de:0aa2] type 00 class 0x0c0500
pci 0000:00:03.2: reg 0x10: [io  0x4900-0x493f]
pci 0000:00:03.2: reg 0x20: [io  0x4d00-0x4d3f]
pci 0000:00:03.2: reg 0x24: [io  0x4e00-0x4e3f]
pci 0000:00:03.2: PME# supported from D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:03.3: [10de:0a89] type 00 class 0x050000
pci 0000:00:03.5: [10de:0aa3] type 00 class 0x0b4000
pci 0000:00:03.5: reg 0x10: [mem 0xfae80000-0xfaefffff]
pci 0000:00:04.0: [10de:0aa5] type 00 class 0x0c0310
pci 0000:00:04.0: reg 0x10: [mem 0xfae7f000-0xfae7ffff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:04.1: [10de:0aa6] type 00 class 0x0c0320
pci 0000:00:04.1: reg 0x10: [mem 0xfae7ec00-0xfae7ecff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: System wakeup disabled by ACPI
pci 0000:00:08.0: [10de:0ac0] type 00 class 0x040300
pci 0000:00:08.0: reg 0x10: [mem 0xfae78000-0xfae7bfff]
pci 0000:00:08.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [10de:0aab] type 01 class 0x060401
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [10de:0ab0] type 00 class 0x020000
pci 0000:00:0a.0: reg 0x10: [mem 0xfae7d000-0xfae7dfff]
pci 0000:00:0a.0: reg 0x14: [io  0xd080-0xd087]
pci 0000:00:0a.0: reg 0x18: [mem 0xfae7e800-0xfae7e8ff]
pci 0000:00:0a.0: reg 0x1c: [mem 0xfae7e400-0xfae7e40f]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [10de:0ab5] type 00 class 0x010185
pci 0000:00:0b.0: reg 0x10: [io  0xd000-0xd007]
pci 0000:00:0b.0: reg 0x14: [io  0xcc00-0xcc03]
pci 0000:00:0b.0: reg 0x18: [io  0xc880-0xc887]
pci 0000:00:0b.0: reg 0x1c: [io  0xc800-0xc803]
pci 0000:00:0b.0: reg 0x20: [io  0xc480-0xc48f]
pci 0000:00:0b.0: reg 0x24: [mem 0xfae76000-0xfae77fff]
pci 0000:00:0c.0: [10de:0ac4] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [10de:0aa0] type 01 class 0x060400
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:09.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:09.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0xe0000000-0xfbffffff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0xfe000000-0xfebfffff] (subtractive decode)
pci 0000:00:0c.0: PCI bridge to [bus 02]
pci 0000:00:0c.0:   bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
pci 0000:01:00.0: [10de:087d] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf6000000-0xf7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xec00-0xec7f]
pci 0000:01:00.0: reg 0x30: [mem 0xfafe0000-0xfaffffff pref]
pci 0000:00:10.0: PCI bridge to [bus 01]
pci 0000:00:10.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:10.0:   bridge window [mem 0xfaf00000-0xfbffffff]
pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf7ffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 16) *14
ACPI: PCI Interrupt Link [LUB2] (IRQs 18) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *9
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB11] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [UB12] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0800-0x080f] has been reserved
system 00:00: [io  0x4000-0x407f] has been reserved
system 00:00: [io  0x4080-0x40ff] has been reserved
system 00:00: [io  0x4400-0x447f] has been reserved
system 00:00: [io  0x4480-0x44ff] has been reserved
system 00:00: [io  0x4800-0x487f] has been reserved
system 00:00: [io  0x4880-0x48ff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:00: [mem 0x000de000-0x000dffff window] has been reserved
system 00:00: [mem 0xfefe2000-0xfefe3fff] has been reserved
system 00:00: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:00: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io  0x0290-0x029f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfc000000-0xfdffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
Switched to clocksource acpi_pm
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 02]
pci 0000:00:0c.0:   bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 01]
pci 0000:00:10.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:10.0:   bridge window [mem 0xfaf00000-0xfbffffff]
pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf7ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfbffffff]
pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xe0000000-0xfbffffff]
pci_bus 0000:03: resource 9 [mem 0xfe000000-0xfebfffff]
pci_bus 0000:02: resource 2 [mem 0xf9f00000-0xf9ffffff 64bit pref]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfaf00000-0xfbffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf7ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 16
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 18
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28720K (ffff8800347d8000 - ffff8800363e4000)
microcode: CPU0 sig=0x106c2, pf=0x8, revision=0x219
microcode: CPU1 sig=0x106c2, pf=0x8, revision=0x219
microcode: CPU2 sig=0x106c2, pf=0x8, revision=0x219
microcode: CPU3 sig=0x106c2, pf=0x8, revision=0x219
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1436635976.643:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 6517
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
pcieport 0000:00:0c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
mtrr: type mismatch for f7000000,200000 old: write-back new: write-combining
mtrr: type mismatch for f7000000,100000 old: write-back new: write-combining
mtrr: type mismatch for f7000000,80000 old: write-back new: write-combining
mtrr: type mismatch for f7000000,40000 old: write-back new: write-combining
mtrr: type mismatch for f7000000,20000 old: write-back new: write-combining
mtrr: type mismatch for f7000000,10000 old: write-back new: write-combining
mtrr: type mismatch for f7000000,8000 old: write-back new: write-combining
mtrr: type mismatch for f7000000,4000 old: write-back new: write-combining
mtrr: type mismatch for f7000000,2000 old: write-back new: write-combining
mtrr: type mismatch for f7000000,1000 old: write-back new: write-combining
vesafb: framebuffer at 0xf7000000, mapped to 0xffffc90002780000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x10
intel_idle: v0.4 model 0x1C
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:04.1: EHCI Host Controller
ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:04.1: debug port 1
ehci-pci 0000:00:04.1: cache line size of 64 is not supported
ehci-pci 0000:00:04.1: irq 18, io mem 0xfae7ec00
ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-38-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:04.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:04.0: OHCI PCI host controller
ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:04.0: irq 16, io mem 0xfae7f000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:04.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: c284edaccf0b473652c34d23bec356944236e63b'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 7:114:542
rtc_cmos 00:01: setting system clock to 2015-07-11 17:32:57 UTC (1436635977)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 556K (ffff880001775000 - ffff880001800000)
Freeing unused kernel memory: 500K (ffff880001b83000 - ffff880001c00000)
systemd-udevd[117]: starting version 204
wmi: Mapper loaded
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[drm] Initialized drm 1.1.0 20060810
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:25:22:88:b4:b9
forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
ahci 0000:00:0b.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:0b.0: irq 41 for MSI/MSI-X
ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio sxs 
scsi0 : ahci
usb 1-8: new high-speed USB device number 3 using ehci-pci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76100 irq 41
ata2: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76180 irq 41
ata3: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76200 irq 41
ata4: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76280 irq 41
ata5: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76300 irq 41
ata6: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76380 irq 41
checking generic (f7000000 130000) vs hw (e0000000 10000000)
checking generic (f7000000 130000) vs hw (f6000000 2000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0ace80b1
nouveau  [  DEVICE][0000:01:00.0] Chipset: MCP79/MCP7A (NVAC)
nouveau  [  DEVICE][0000:01:00.0] Family : NV50
nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
usb 1-8: New USB device found, idVendor=1a40, idProduct=0201
usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-8: Product: USB 2.0 Hub [MTT]
hub 1-8:1.0: USB hub found
hub 1-8:1.0: 7 ports detected
nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
nouveau  [   VBIOS][0000:01:00.0] BIT signature found
nouveau  [   VBIOS][0000:01:00.0] version 62.79.78.00.00
nouveau 0000:01:00.0: irq 42 for MSI/MSI-X
nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
nouveau  [     PFB][0000:01:00.0] RAM type: stolen system memory
nouveau  [     PFB][0000:01:00.0] RAM size: 256 MiB
nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
nouveau  [     CLK][0000:01:00.0] 03: core 200 MHz shader 400 MHz vdec 200 MHz
nouveau  [     CLK][0000:01:00.0] 05: core 300 MHz shader 600 MHz vdec 300 MHz
nouveau  [     CLK][0000:01:00.0] 07: core 350 MHz shader 800 MHz vdec 350 MHz
nouveau  [     CLK][0000:01:00.0] 0f: core 450 MHz shader 1100 MHz vdec 450 MHz
nouveau  [     CLK][0000:01:00.0] --: core 450 MHz shader 1100 MHz vdec 450 MHz
[TTM] Zone  kernel: Available graphics memory: 1669680 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau  [     DRM] VRAM: 256 MiB
nouveau  [     DRM] GART: 1048576 MiB
nouveau  [     DRM] TMDS table version 2.0
nouveau  [     DRM] DCB version 4.0
nouveau  [     DRM] DCB outp 00: 02000300 0000001e
nouveau  [     DRM] DCB outp 01: 01011322 00000030
nouveau  [     DRM] DCB outp 02: 02022332 00020010
nouveau  [     DRM] DCB conn 00: 00000000
nouveau  [     DRM] DCB conn 01: 00001131
nouveau  [     DRM] DCB conn 02: 00002261
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau  [     DRM] MM: using M2MF for buffer copies
nouveau  [     DRM] allocated 1280x1024 fb: 0x50000, bo ffff88003540a800
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3.00: ATAPI: HL-DT-ST DVD+/-RW GT10N, A102, max UDMA/100
ata3.00: configured for UDMA/100
ata2.00: ATA-8: WDC WD5000BEVT-00A0RT0, 01.01A01, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5: SATA link down (SStatus 0 SControl 300)
ata2.00: configured for UDMA/133
ata1.00: ATA-8: KINGSTON SV300S37A60G, 603ABBF0, max UDMA/133
ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000BEVT-0 1A01 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GT10N    A102 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
 sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 2-2: new low-speed USB device number 2 using ohci-pci
tsc: Refined TSC clocksource calibration: 1599.994 MHz
usb 2-2: New USB device found, idVendor=045e, idProduct=0039
usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
usb 2-2: Manufacturer: Microsoft
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:04.0/usb2/2-2/2-2:1.0/0003:045E:0039.0001/input/input3
hid-generic 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:04.0-2/input0
Switched to clocksource tsc
random: nonblocking pool is initialized
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Adding 3999740k swap on /dev/sda2.  Priority:-1 extents:1 across:3999740k SSFS
Adding 2097148k swap on /dev/sdb3.  Priority:-2 extents:1 across:2097148k FS
systemd-udevd[392]: starting version 204
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
i2c i2c-7: nForce2 SMBus adapter at 0x4d00
ACPI Warning: SystemIO range 0x0000000000004e00-0x0000000000004e3f conflicts with OpRegion 0x0000000000004e00-0x0000000000004e3f (\_SB_.PCI0.SM00) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ppdev: user-space parallel port driver
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
device-mapper: multipath: version 1.7.0 loaded
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
snd_hda_intel 0000:00:08.0: Disabling MSI
sound hdaudioC0D0: autoconfig: line_outs=3 (0x24/0x25/0x26/0x0/0x0) type:line
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    dig-out=0x2d/0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Mic=0x2b
sound hdaudioC0D0:      Line=0x2a
input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input4
input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input5
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:08.0/sound/card0/input6
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (735) killed by TERM signal
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: samba-ad-dc main process (783) terminated with status 1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (884) killed by HUP signal
init: cups main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1669) terminated with status 1
perf interrupt took too long (2552 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
perf interrupt took too long (5015 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf interrupt took too long (10017 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x624 offMax=0x51e4
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.28 (interface 0x001a000a).
vboxpci: IOMMU not found (not registered)
capability: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
perf interrupt took too long (20042 > 20000), lowering kernel.perf_event_max_sample_rate to 6250

Return To atom a330 linux mint 17.2 64bit + ssd System Information